Wilwood's D52 Front Caliper Kit is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Full Size Jeep Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line mounting. Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.00” piston provide 6.28 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads.
Vehicles 1978 & Up (with M10-1.5 banjo bolts) will require new brake lines (CLICK HERE TO VIEW).
Fits:
- Jeep Wagoneer 1977-1978 All
- Jeep Wagoneer 1974-1976 Disc Brake Spindle
- Jeep Cherokee 1977-1978 All
- Jeep Cherokee 1974-1976 Disc Brake Spindle
- Jeep J10 Truck 1977-1978 All
- Jeep J10 Truck 1974-1976 Disc Brake Spindle
- Jeep J20 Truck 1977-1978 All
- Jeep J20 Truck 1974-1976 Disc Brake Spindle
*Fits GM vehicles 1968-96 that have factory D52 single piston calipers and 1.28 in. thick rotors. Will not fit later models using Metric D154 calipers. The caliper inlet port requires a 7/16-20 banjo bolt or a line adapter using crush washers as a seal. Stock rubber lines with a 7/16-20 banjo can be used. For later model vehicles that were originally equipped with metric connections, a new line kit will be required.
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
Caliper Piston Quantity: Two
Piston Diameter (in.): 2.000
Rotor Thickness (in.): 1.280 in.
Caliper Material: Aluminum
Caliper Color: Red
Caliper Logo: Wilwood
Parking Brake Provision: No
Fittings Included: No
Fitting Attachment 1: Banjo
Thread Size: 7/16 in.-20
Brake Pads Included: Yes
Brake Pad Material: Semi-metallic
Brackets Included: No
Remanufactured: No
Quantity: Sold as a kit.