null
×
close
click to zoom in

270H Cam, Lifter, Spring and Timing Complete Kit; AMC 290-401

(No reviews yet) Write a Review
UPC:
00036584460046
Weight:
26.00 LBS
MSRP: $659.94
$598.95
(You save $60.99 )

#SAVETHEFULLSIZEJEEP

A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.

270H Cam, Lifter, Spring and Timing Complete Kit; AMC 290-401

270H Cam, Lifter, Spring and Timing Complete Kit; AMC 290-401

MSRP: $659.94
$598.95
(You save $60.99 )

AMC 290-401 c.i. 8 CYL. 1974-1991 Full Size Jeeps. Hydraulic-Best cam for 360-401 with stock converter. Works well with headers and aftermarket intake. Mild rough idle. Magnum Hydraulic Flat Tappet Camshafts. All COMP Cams Camshafts are manufactured to the strictest tolerances. Rigorously tested and checked for quality. **Note** Stock valve springs CANNOT be used with this camshaft. 

Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions.

  • Advertised duration: 270 intake/ 270 exhaust
  • Duration at .050 in. cam lift: 224 intake/224 exhaust
  • Gross valve lift: .480 in. intake/.480 in. exhaust
  • Lobe separation: 110 degrees
  • Basic rpm range: 1,800 to 5,800
  • Great cam for 360-401 with stock converter. Works well with headers and aftermarket intake. Mild rough idle.
  • Recommended compression ratio for 360:  approximately 9.5:1
  • Recommended compression ratio for 401: approximately 9:1

Installation Instructions

Installation Instructions


This Part Fits:

Year Make Model Submodel
1974 Jeep Cherokee Base
1975 Jeep Cherokee Base
1976-1977 Jeep Cherokee Base
1978 Jeep Cherokee Base
1979-1983 Jeep Cherokee Base
1981-1982 Jeep Cherokee Chief
1983 Jeep Cherokee Pioneer
1974 Jeep Cherokee S
1975 Jeep Cherokee S
1976 Jeep Cherokee S
1977 Jeep Cherokee S
1978 Jeep Cherokee Wide Track
1979-1980 Jeep Cherokee Wide Track
1984-1991 Jeep Grand Wagoneer Base
1984-1985 Jeep Grand Wagoneer Limited
1971-1972 Jeep J-100 Base
1973 Jeep J-100 Base
1970-1971 Jeep J-2500 Base
1972 Jeep J-2500 Base
1973 Jeep J-2500 Base
1970 Jeep J-2600 Base
1971-1972 Jeep J-2600 Base
1973 Jeep J-2600 Base
1970-1971 Jeep J-3800 Base
1971-1972 Jeep J-4500 Base
1973 Jeep J-4500 Base
1971 Jeep J-4600 Base
1972-1973 Jeep J-4600 Base
1971 Jeep J-4700 Base
1972 Jeep J-4700 Base
1973 Jeep J-4700 Base
1971-1973 Jeep J-4800 Base
1974-1975 Jeep J10 Base
1976-1988 Jeep J10 Base
1974 Jeep J20 Base
1975-1976 Jeep J20 Base
1977-1978 Jeep J20 Base
1979-1988 Jeep J20 Base
1972-1975 Jeep Wagoneer Base
1976 Jeep Wagoneer Base
1977 Jeep Wagoneer Base
1978 Jeep Wagoneer Base
1979-1982 Jeep Wagoneer Base
1982-1983 Jeep Wagoneer Brougham
1973 Jeep Wagoneer Custom
1974 Jeep Wagoneer Custom
1975 Jeep Wagoneer Custom
1976 Jeep Wagoneer Custom
1979-1983 Jeep Wagoneer Limited



Advertised Exhaust Duration 270
Advertised Intake Duration 270
Applications Fits AMC 290, 304, 343, 360, 390 and 401
Assembly Lubricant Included Yes
Basic Operating RPM Range 1,800-5,800
C.A.R.B. E.O. Number N/A
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965? Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967? Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967? Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for On-Road Vehicles? No
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles? Yes, but must be a race/competition only vehicle.
C.A.R.B. Exemption Reason N/A
California Proposition 65 WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov
Cam Type Hydraulic Flat Tappet
Camshaft Material Cast Iron
Camshaft Series Magnum
Description Best cam for 360-401 with stock converter. Works well with headers and aftermarket intake. Mild rough idle.
Engine Family American Motors 290-401 c.i. 8 Cylinder (1966-1991)
Exhaust Duration at .050 inch Lift 224
Exhaust Valve Lift 0.48
Gaskets Included No
Intake Duration at .050 Inch Lift 224
Intake Valve Lift 0.48
Kit Type K-Kit - Complete Kit
Lifter Type Hydraulic Flat Tappet
Lifters Included Yes
Lobe Separation 110
Timing Chain and Gears Included Yes
Usage Street/Strip
Valve Springs Included Yes
Valve Stem Seals Included Yes

To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.

Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.

Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.

What Are My Shipping Fees?

For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:

Retail cost of the item Per Item Return Fee
Less than $25.00 $3.75
From $25.00-$49.99 $5.75
From $50.00-$99.99 $7.75
More than $100.00 $9.75

More

to top