null
×
close
click to zoom in

Blaster 2 Ignition Coil

(No reviews yet) Write a Review
UPC:
00085132082025
Availability:
This part ships direct from the manufacturer, lead times, stock and shipping may vary.
Weight:
3.20 LBS
$93.26

#SAVETHEFULLSIZEJEEP

A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.

Blaster 2 Ignition Coil

Blaster 2 Ignition Coil

$93.26
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

This Part Fits:

YearMakeModelSubmodel
1974JeepCherokee
1975JeepCherokeeBase
1976JeepCherokeeBase
1977JeepCherokeeBase
1975JeepCherokeeS
1976JeepCherokeeS
1977JeepCherokeeS
1965-1967JeepGladiator
1965-1971JeepJ-100
1968-1971JeepJ-2500
1972JeepJ-2500
1973JeepJ-2500
1968-1970JeepJ-2600
1972-1973JeepJ-2600
1968-1969JeepJ-2700
1968-1970JeepJ-3500
1968-1970JeepJ-3600
1968-1970JeepJ-3700
1968JeepJ-3800
1974JeepJ10
1975JeepJ10
1976-1978JeepJ10
1974JeepJ20
1975JeepJ20
1976JeepJ20
1972JeepWagoneer
1973JeepWagoneer
1974JeepWagoneer
1975-1978JeepWagoneer


CommentsHolley Performance Emission Code 1: This part is legal for sale and use on Emissions Controlled Vehicles; in all 50 states; when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle
DescriptionBlaster 2 Ignition Coil; High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;
Inductance8 mH
Maximum Voltage45000
Peak Current140 mA
Primary Resistance.700 ohms
Secondary Resistance4.5K ohms
Spark Duration350 uS
Turns Ratio100:1
WARNING CA Proposition 65Yes
WARNING CA Proposition 65 MessageWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.

Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.

Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.

What Are My Shipping Fees?

For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:

Retail cost of the item Per Item Return Fee
Less than $25.00 $3.75
From $25.00-$49.99 $5.75
From $50.00-$99.99 $7.75
More than $100.00 $9.75

More

to top