null
×
close

Shopping Cart:

Toggle menu
Wish Lists
0
My Cart
0
Engine Camshaft and Lifter Kit - 2132
click to zoom in

Engine Camshaft and Lifter Kit - 2132

(No reviews yet) Write a Review
UPC:
00085347021321
Availability:
This part ships direct from the manufacturer, lead times, stock and shipping may vary.
Weight:
16.15 LBS
$387.31

#SAVETHEFULLSIZEJEEP

A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.

Engine Camshaft and Lifter Kit - 2132

Engine Camshaft and Lifter Kit - 2132

$387.31

video gallery

Description
Edelbrock Performer-Plus Camshaft #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2132 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 275 Ft Lbs of Torque when paired with Performer AMC intake manifold #2131 and stock cylinder heads. Camshaft specifications: - Intake duration: 204 Degrees - Exhaust duration: 214 Degrees - Intake lift: .448" - Exhaust lift: .472" - Lobe separation: 110 Degree - Intake Center Line: 105 Degree - Vacuum: 15"

Installation Instructions



This Part Fits:

YearMakeModelSubmodel
1974JeepCherokee
1975-1983JeepCherokee
1972-1981JeepCJ5
1972-1975JeepCJ6
1976-1981JeepCJ7
1984-1991JeepGrand Wagoneer
1972JeepJ-2500
1973JeepJ-2500
1972JeepJ-2600
1973JeepJ-2600
1974-1988JeepJ10
1974JeepJ20
1975-1988JeepJ20
1972-1983JeepWagoneer


ApplicationsAMC:Small-Block:290 (4.8L)/304 (5.0L)/360 (5.9L)/390 (6.4L)/401 (6.6L)
DescriptionEdelbrock Performer-Plus #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range.
Description_TRARecommended Valve Springs for OEM heads: Edelbrock part #5832 non-rotator/# 5932 Rotator; In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs.; Oil/additive must contain Zinc designed for use with flat tappet camshafts.; Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up.; Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm.
RGLWARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Shipping & Returns

To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.

Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.

Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.

What Are My Shipping Fees?

For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:

Retail cost of the item Per Item Return Fee
Less than $25.00 $3.75
From $25.00-$49.99 $5.75
From $50.00-$99.99 $7.75
More than $100.00 $9.75

More

to top