null
×
close

Engine Cylinder Head - 60139

(No reviews yet) Write a Review
UPC:
00085347601394
Availability:
This part ships direct from the manufacturer, lead times, stock and shipping may vary.
Weight:
33.00 LBS
$1,419.64

#SAVETHEFULLSIZEJEEP

A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.

Engine Cylinder Head - 60139

Engine Cylinder Head - 60139

$1,419.64
The Edelbrock #60139 Performer RPM cylinder head is designed as a bolt-on performance upgrade for any 1967-91 AMX, Javelin or Jeep with a 343, 360, 390 or 401 AMC V8 engine. They include adjustable rocker studs and guide plates set-up for use with small-block Ford style adjustable 1.6:1 ratio rockers. The intake flange is dual-drilled to accommodate early and late model intake bolt patterns, covering 1967-91. A Complete head includes larger than- stock valve springs to handle most high-lift cams. They feature stock location ports for compatibility with standard manifolds and headers. A direct bolt-on for 1970 and later engines with 1/2" head bolts, This head includes step-dowel pins for pre-1970 engines. Their dual-quench combustion chambers produce approximately 9.5:1 compression in 401 V8 engines. The 45deg intake seat angle offers improved mid- to high-lift flow over the stock 30deg angle. The Edelbrock #601139 Performer RPM cylinder head has a machined heat crossover for 50-state emissions legal performance.

Installation Instructions



This Part Fits:

YearMakeModelSubmodel
1974JeepCherokee
1975-1983JeepCherokee
1984-1991JeepGrand Wagoneer
1972-1973JeepJ-2500
1972-1973JeepJ-2600
1974-1988JeepJ10
1974JeepJ20
1975-1988JeepJ20
1972-1973JeepWagoneer
1974JeepWagoneer
1975-1983JeepWagoneer


ApplicationsAMC:-:304 (5.0L)/360 (5.9L)/401 (6.6L)
DescriptionThe Edelbrock #60139 Performer RPM Cylinder Heads are designed as a bolt-on performance upgrade for any 1967-91 AMX, Javelin or Jeep with a 343, 360, 390 or 401 AMC V8 engine.
Description_TRAMatch with Edelbrock head gasket sets.; Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.; Use Edelbrock Step Washer Kit #9693 on 1967-69 engines with 7/16" head bolts.; Deck thickness: 5/8"; Rocker stud diameter: 3/8"; Pushrod diameter: 5/16" (width of slot in guide plate).
Exhaust Port LocationStandard
Exhaust Runner Volume70
RGLWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
SeriesPerformer

To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.

Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.

Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.

What Are My Shipping Fees?

For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:

Retail cost of the item Per Item Return Fee
Less than $25.00 $3.75
From $25.00-$49.99 $5.75
From $50.00-$99.99 $7.75
More than $100.00 $9.75

More

to top