null
×
close
click to zoom in

Fluid Control Thermostat Kit, 1/2" NPT

(No reviews yet) Write a Review
UPC:
00083277157196
Availability:
This part ships direct from the manufacturer, lead times, stock and shipping may vary.
Weight:
1.44 LBS
$67.82

#SAVETHEFULLSIZEJEEP

A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.

Fluid Control Thermostat Kit, 1/2" NPT

Fluid Control Thermostat Kit, 1/2" NPT

$67.82
This Billet Style Cast Aluminum Fluid Control Thermostat with 1/2” NPT ports allows the oil to bypass the cooler until it reaches 180°F at which point the internal thermostatic valve will close and force 100% of the oil through the cooler while maintaining a constant pressure system. This process allows the engine/transmission to achieve the ideal operating temperature quicker before passing the oil through the cooler. The unit can be rotated 180° to change flow direction. Hardware kit with hose barb fittings and hose clamps included.

Installation Instructions



This Part Fits:

YearMakeModelSubmodel
1981-1983JeepCherokee
1963-1965JeepGladiator
1966JeepGladiatorBase
1984JeepGrand Wagoneer
1985-1986JeepGrand Wagoneer
1991JeepGrand Wagoneer
1963-1965JeepJ-100
1966JeepJ-100Base
1963JeepJ-200
1965JeepJ-200
1965JeepJ-2500
1966JeepJ-2500Base
1981-1983JeepJ10
1984-1985JeepJ10
1986JeepJ10
1984-1986JeepJ20
1963-1965JeepWagoneer
1981-1983JeepWagoneer
1984-1986JeepWagoneer
1966JeepWagoneerBase


Activating temperature180°
Barb fitting size1/2
ColorSilver
Comments1/2" NPT inlet/outlet ports
CommentsBillet style design
CommentsBracket Sold Separately
CommentsBypasses cooler until fluid temperature reaches 180°F
CommentsCan be rotated 180° to switch flow direction
CommentsFlows up to 20 gallons per minute
CommentsKit includes 1/2" hose barb fittings and hose clamps
CommentsPerfect for cold weather climates
CommentsProvides quicker warm-up temperatures
CommentsRated up to 200 psi
CommentsUltra bright finish
Inlet size1/2 NPT

To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.

Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.

Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.

What Are My Shipping Fees?

For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:

Retail cost of the item Per Item Return Fee
Less than $25.00 $3.75
From $25.00-$49.99 $5.75
From $50.00-$99.99 $7.75
More than $100.00 $9.75

More

to top