null
×
close
click to zoom in

High Energy Hydraulic Flat Lifter Set for Chevrolet 173, 207 and 2.8-3.4L - CL16-232-4

(No reviews yet) Write a Review
UPC:
00036584450351
Weight:
11.00 LBS
MSRP: $310.74
$297.95
(You save $12.79 )

#SAVETHEFULLSIZEJEEP

A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.

High Energy Hydraulic Flat Lifter Set for Chevrolet 173, 207 and 2.8-3.4L - CL16-232-4

High Energy Hydraulic Flat Lifter Set for Chevrolet 173, 207 and 2.8-3.4L - CL16-232-4

MSRP: $310.74
$297.95
(You save $12.79 )
Good power for 2 or 4 wheel drive S-10, S-15 or Blazer. Works well in mild towing applications. Smooth idle.

Installation Instructions

Installation Instructions



This Part Fits:

YearMakeModelSubmodel
1984-1986JeepCherokeeBase
1985-1986JeepCherokeeChief
1985-1986JeepCherokeeLaredo
1985-1986JeepCherokeePioneer
1986JeepComancheCustom
1986JeepComancheX
1986JeepComancheXLS
1984-1986JeepWagoneerBase
1984-1986JeepWagoneerLimited


Advertised Exhaust Duration252
Advertised Intake Duration252
Assembly Lubricant IncludedYes
Basic Operating RPM Range800-4,800
C.A.R.B. E.O. NumberN/A
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for On-Road Vehicles?No
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?Yes, but must be a race/competition only vehicle.
C.A.R.B. Exemption ReasonN/A
California Proposition 65WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov
Cam TypeHydraulic Flat Tappet
Camshaft MaterialCast Iron
Camshaft SeriesHigh Energy
DescriptionGood power for 2 or 4 wheel drive S-10, S-15 or Blazer. Works well in mild towing applications. Smooth idle.
Engine FamilyChevrolet 173-207 c.i. (2.8L-3.4L) 60 Degree 6 Cylinder (1979-1994)
Exhaust Duration at .050 inch Lift206
Exhaust Valve Lift0.425
Gaskets IncludedNo
Intake Duration at .050 Inch Lift206
Intake Valve Lift0.425
K-Kit UpgradeK16-232-4
Kit TypeCL-Kit - Cam and Lifter Kit
Lifter TypeHydraulic Flat Tappet
Lifters IncludedYes
Lobe Separation110
Locks IncludedNo
Retainers IncludedNo
SK-Kit UpgradeSK16-232-4
Timing Chain and Gears IncludedNo
UsageStreet/Performance
Valve Springs RequiredYes
Valve Stem Seals IncludedNo

To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.

Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.

Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.

What Are My Shipping Fees?

For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:

Retail cost of the item Per Item Return Fee
Less than $25.00 $3.75
From $25.00-$49.99 $5.75
From $50.00-$99.99 $7.75
More than $100.00 $9.75

More

to top