null
×
close
click to zoom in

HRT Blower Stage 1 Hydraulic Roller CK-Kit for '09+ Dodge 5.7/6.4L HEMI

(No reviews yet) Write a Review
UPC:
00036584411420
Availability:
This part ships direct from the manufacturer, lead times, stock and shipping may vary.
Weight:
20.00 LBS
$1,357.00

#SAVETHEFULLSIZEJEEP

A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.

HRT Blower Stage 1 Hydraulic Roller CK-Kit for '09+ Dodge 5.7/6.4L HEMI

HRT Blower Stage 1 Hydraulic Roller CK-Kit for '09+ Dodge 5.7/6.4L HEMI

$1,357.00
The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.

Installation Instructions





Advertised Exhaust Duration291
Advertised Intake Duration279
ApplicationsDodge 5.7/6.4L HEMI Engines w/ VVT
Assembly Lubricant IncludedNo
Basic Operating RPM Range1,800-6,600
C.A.R.B. E.O. NumberN/A
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for On-Road Vehicles?No
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?Yes, but must be a race/competition only vehicle.
C.A.R.B. Exemption ReasonN/A
California Proposition 65WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov
Cam TypeHydraulic Roller
Camshaft Gear Attachment1
Camshaft MaterialBillet Steel
Camshaft SeriesHRT
CommentsStage 2 available under CK201-337-11
DescriptionPerfect Choice for 5.7L Eagle or 6.4L Apache with 2.5L and smaller blowers while keeping limited phaser control for off idle response. (Req DOD Delete, 26918 Springs & Phaser Limiter)
Description_SLASupercharger Cam Kit
Engine FamilyHemi 5.7-6.4L, 2009+
Estimated Horsepower Gain129
Exhaust Duration at .050 inch Lift233
Exhaust Valve Lift0.594
Gaskets IncludedNo
Grind NumberHRT Blower Stage 1
Intake Duration at .050 Inch Lift221
Intake Valve Lift0.594
Lifter StyleHydraulic Roller
Lifters IncludedNo
Lobe Separation116
Locks IncludedYes
Pushrods IncludedYes
Recommended Phaser Limiter/Lock OutLimiter Required (# 5760 Not Included)
Recommended Upgraded Stock Rocker ArmsN/A
Recommended Valve Springs26918
Retainers IncludedYes
Stage1
Timing Set IncludedNo
UsageStreet Strip
Valve Seals IncludedYes
Valve Spring Seats IncludedYes
Valve Springs IncludedYes

To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.

Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.

Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.

What Are My Shipping Fees?

For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:

Retail cost of the item Per Item Return Fee
Less than $25.00 $3.75
From $25.00-$49.99 $5.75
From $50.00-$99.99 $7.75
More than $100.00 $9.75

More

to top