null
×
close
click to zoom in

HRT Turbo Stage 2 Hydraulic Roller CK-Kit for '09+ Dodge 5.7/6.4L HEMI

(No reviews yet) Write a Review
UPC:
00036584411413
Availability:
This part ships direct from the manufacturer, lead times, stock and shipping may vary.
Weight:
20.00 LBS
MSRP: $1,601.94
$1,505.95
(You save $95.99 )

#SAVETHEFULLSIZEJEEP

A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.

HRT Turbo Stage 2 Hydraulic Roller CK-Kit for '09+ Dodge 5.7/6.4L HEMI

HRT Turbo Stage 2 Hydraulic Roller CK-Kit for '09+ Dodge 5.7/6.4L HEMI

MSRP: $1,601.94
$1,505.95
(You save $95.99 )
The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.

Installation Instructions





Advertised Exhaust Duration295
Advertised Intake Duration287
ApplicationsDodge 5.7/6.4L HEMI Engines w/ VVT
Assembly Lubricant IncludedNo
Basic Operating RPM Range2,000-7,000
C.A.R.B. E.O. NumberN/A
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for On-Road Vehicles?No
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?Yes, but must be a race/competition only vehicle.
C.A.R.B. Exemption ReasonN/A
California Proposition 65WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov
Cam TypeHydraulic Roller
Camshaft Gear AttachmentOEM
Camshaft MaterialBillet Steel
Camshaft SeriesHRT
CommentsStage 1 available under CK201-330-11
DescriptionBest camshaft for larger turbochargers with optimized low backpressure hot side. Dyno tested to 7500+ RPM. (Req DOD delete, 7230 springs & Phaser LOCK)
Description_SLATurbo Cam Kit
Engine FamilyHemi 5.7-6.4L, 2009+
Estimated Horsepower Gain with Kit182
Exhaust Duration at .050 inch Lift237
Exhaust Valve Lift0.635
Gaskets IncludedNo
Grind NumberHRT Turbo Stage 2
Intake Duration at .050 Inch Lift229
Intake Valve Lift0.635
Lifter StyleHydraulic Roller
Lifters IncludedNo
Lobe Separation116
Locks IncludedYes
Pushrods IncludedYes
Recommended Phaser Limiter/Lock OutPhaser Lock Out (#5761 Required)
Recommended Upgraded Stock Rocker ArmsN/A
Recommended Valve Springs7230-16
Retainers IncludedYes
Stage2
Timing Set IncludedNo
UsageStreet Strip
Valve Seals IncludedYes
Valve Spring Seats IncludedYes
Valve Springs IncludedYes

To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.

Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.

Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.

What Are My Shipping Fees?

For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:

Retail cost of the item Per Item Return Fee
Less than $25.00 $3.75
From $25.00-$49.99 $5.75
From $50.00-$99.99 $7.75
More than $100.00 $9.75

More

to top