My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
#SAVETHEFULLSIZEJEEP
A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1968-1971 | Jeep | J-100 | Base |
| 1969-1971 | Jeep | J-2500 | Base |
| 1969-1971 | Jeep | J-2600 | Base |
| 1969-1970 | Jeep | J-2700 | Base |
| 1969-1970 | Jeep | J-3500 | Base |
| 1969-1970 | Jeep | J-3600 | Base |
| 1969-1970 | Jeep | J-3700 | Base |
| 1969-1971 | Jeep | J-3800 | Base |
| 1968-1971 | Jeep | Wagoneer | Base |
| Advertised Exhaust Duration | 270 |
| Advertised Intake Duration | 262 |
| Applications | Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information. |
| Assembly Lubricant Included | Yes |
| Basic Operating RPM Range | 1,500-5,500 |
| C.A.R.B. E.O. Number | N/A |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965? | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967? | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967? | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles? | No |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles? | Yes, but must be a race/competition only vehicle. |
| C.A.R.B. Exemption Reason | N/A |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Cam Type | Hydraulic Flat Tappet |
| Camshaft Gear Attachment | 3-Bolt |
| Camshaft Material | Cast Iron |
| Camshaft Series | Xtreme Energy Computer Controlled |
| Description | Good for TPI 305 or 350 with aftermarket chip and upgraded exhaust. |
| Engine Family | Chevrolet 262-400 c.i. 8 Cylinder (1958-1998) |
| Exhaust Duration at .050 inch Lift | 224 |
| Exhaust Valve Lift | 0.47 |
| Gaskets Included | No |
| Intake Duration at .050 Inch Lift | 218 |
| Intake Valve Lift | 0.464 |
| Kit Type | SK-Kit - Small Kit |
| Lifter Type | Hydraulic Flat Tappet |
| Lifters Included | Yes |
| Lobe Separation | 114 |
| Locks Included | No |
| Pushrods Included | No |
| Retainers Included | No |
| Timing Chain and Gears Included | Yes |
| Usage | Street/Performance |
| Valve Springs Required | Yes |
| Valve Stem Seals Included | No |
To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.
Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.
Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.
What Are My Shipping Fees?
For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:
| Retail cost of the item | Per Item Return Fee |
|---|---|
| Less than $25.00 | $3.75 |
| From $25.00-$49.99 | $5.75 |
| From $50.00-$99.99 | $7.75 |
| More than $100.00 | $9.75 |
COMP Cams
CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.Installation InstructionsInstallation InstructionsThis Part Fits:
COMP Cams
CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.Installation InstructionsInstallation InstructionsThis Part Fits:
COMP Cams
CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.Installation InstructionsInstallation InstructionsThis Part Fits:
COMP Cams
K-KIT - Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions...
COMP Cams
CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.Installation InstructionsInstallation InstructionsThis Part Fits:
