null
×
close
click to zoom in

Stage 1 LST Blower Camshaft for 5.3L LS

(No reviews yet) Write a Review
UPC:
00036584413011
Availability:
This part ships direct from the manufacturer, lead times, stock and shipping may vary.
Weight:
9.80 LBS
$604.74

#SAVETHEFULLSIZEJEEP

A Portion Of The Proceeds From Your Purchase Supports The Development & Reproduction Of High Quality 1963-1991 Restoration Parts.

Stage 1 LST Blower Camshaft for 5.3L LS

Stage 1 LST Blower Camshaft for 5.3L LS

$604.74
Perfect choice for 5.3L "cam only" and mildly modified blower engines. Low Shock profiles allow 7200 RPM stability with package



Advertised Exhaust Duration294
Advertised Intake Duration283
ApplicationsFits all 3-Bolt GM LS engines, but designed to perform best with turbocharged 5.3L LS engines
Assembly Lubricant IncludedNo
Basic Operating RPM Range2000-7200
C.A.R.B. E.O. NumberN/A
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for eign Vehicles Manufactured Before 1967?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for On-Road Vehicles?No
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?Yes, but must be a race/competition only vehicle.
C.A.R.B. Exemption ReasonN/A
California Proposition 65WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov
Cam TypeHydraulic Roller
Camshaft Gear Attachment3-Bolt
Camshaft MaterialBillet Steel
Camshaft SeriesLow Shock Technology
CK-Kit UpgradeCK54-335-11
CommentsAvailable in CK-Kit under CK54-335-11
CommentsAvailable in MK-Kit w/ 24X Timing Set under MK54-335-24
CommentsAvailable in MK-Kit w/ 58X Timing Set under MK54-335-58
DescriptionPerfect choice for 5.3L "cam only" and mildly modified blower engines. Low Shock profiles allow 7200 RPM stability with package
Engine FamilyGM LS GEN III/IV 3-Bolt 8 Cylinder (1997-2015)
Exhaust Duration at .050 inch Lift239
Exhaust Valve Lift0.612
Grind Number283MGH14
Intake Duration at .050 Inch Lift225
Intake Valve Lift0.612
Lifter TypeHydraulic Roller
Lifters IncludedNo
Lobe Separation114
MK-Kit Upgrade (24X)MK54-335-24
MK-Kit Upgrade (58X)MK54-335-58
Recommended Cam Install Kit5621
Recommended Max-Lift BSR Shaft Rocker System1981-16
Recommended Upgraded Stock Rocker Arms1477-16
Stage1
UsageStreet
Valve Springs RequiredYes

To submit a return or exchange request, please go to our Contact Us page to submit order information. Photos of any damaged products may be requested and required to process any full or partial refund. If approved, we will provide you with an RMA number along with a return label for shipping.

Parts returned that are not defective, are subject to a 25% restocking charge. JeepRecyclers.com/McDaniel Motor Co. is NOT responsible for any parts that have been altered, modified, disassembled, or damaged by misuse or an accident subsequent to the parts purchase.

Reconditioned parts come with a minimum warranty of 90 days, unless otherwise stated (Refer to product listing for warranty duration). The warranty is void if the parts are not returned in the same condition in which they are sold. Warranties for aftermarket parts are covered by the manufacturer.

What Are My Shipping Fees?

For orders delivered within the continental US where reason for return isn't a result of a JeepRecyclers.com/McDaniel Motor Co. error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided. The flat fee for each item being returned can be found in the chart below:

Retail cost of the item Per Item Return Fee
Less than $25.00 $3.75
From $25.00-$49.99 $5.75
From $50.00-$99.99 $7.75
More than $100.00 $9.75

More

to top